Volvo 14-tonne lorry with loading crane and trailer for conversions, repairs and servicing
It was with great pleasure that the Villiger Service Team took delivery of the new Volvo service vehicle in Neuseddin, near Berlin, at the end of June. The lorry (14-tonne) was supplied by our Volvo partner Jungbluth Nutzfahrzeuge and converted by our partner workshop, Schönwetter & Co. GmbH.
Here, the Volvo was also fitted with a loading crane at the rear of the vehicle, preparing it for professional use in the conversion and repair of underfloor and semi-underfloor systems. The new lorry replaces Villiger’s old Iveco service vehicle, which is now being retired after approximately 11 years of service.
A little powerhouse
With a large loading area and a payload of around 10 tonnes, the new Villiger service vehicle is capable of transporting a large number of systems or columns. And at just under 8 metres, the reach of the rear-loading crane is also entirely sufficient for the relevant tasks on site.
“It is only in the case of new builds, when the access shaft or concrete element has to be transported and installed in addition to the underfloor system, that our service vehicle’s capacity is insufficient,” says Jonas Mahl. “But for this, we have a very good network of local partners.”

From left to right: Sascha Fernholz, Axel Ilgner from Jungbluth, Thomas Schmid, Markus Kindl, Jonas Mahl from Villiger | Collection of the new service vehicle from Jungbluth in Neuseddin.
We planned and designed the new Volvo in collaboration with our partners Jungbluth and Schönwetter. It is intended for conversion, repair and maintenance work in German-speaking countries. The load bed, together with the trailer, has enough space to transport up to four of our underfloor systems. And using the rear-loading crane, we can install these systems into the corresponding mounting shafts.
Jonas Mahl, Service Manager at Villiger Entsorgungssysteme GmbH
How our customers benefit from the new Villiger service vehicle
For Villiger, the new service vehicle greatly simplifies planning work on construction sites. This is because there is no longer any need to request mobile cranes or lorries from other companies and coordinate them for work on site. For our customers, this means even greater reliability, as all upcoming tasks are now planned, prepared and carried out by just one company – Villiger.
Easier for local residents too
But it is not just the planning that becomes easier. The service vehicle also makes on-site work easier. This is because, instead of the haulage company’s lorry delivering the systems and an external mobile crane operating (and parking) on site, there is now just one vehicle at the construction site. This is a benefit that should not be underestimated, particularly in residential areas where resident parking spaces are in short supply. Temporary road closures are therefore hardly necessary any more, as a single vehicle can carry out all the tasks at the construction site.
First major operation already planned
Alongside smaller jobs, which are usually completed within a day, the first major operation for the new service vehicle has already been planned: in September 2026, the Volvo will provide substantial support for approximately three weeks during refurbishment work in Hamburg. A large number of underground systems are being retrofitted here – including safety platforms, containers and columns. “This will be the first major operation for the new service vehicle,” says Jonas Mahl. “By then at the latest, the Volvo will be an important member of our service team.”
Do you have any questions? Please get in touch with us.